What type of fasteners do I need to secure the Conversion System Mounting Plates to my fence?Updated a year ago

Fasteners for securing the mounting plates to your existing fence are not included with our kits. This is primarily due to the fact that our system is designed to be installed on a wide range of fence types/materials, all of which require different types of fasteners. But the good news is that the types of fasteners we recommend are all common and easy to find at any home improvement store!

Wood Fence
Bugle-head wood screws are recommended to fit nicely into the holes of the mounting plate. #8 bugle-head 1-¾” to 2” long works well for 4x4 wooden posts.  When attaching to stringers (horizontal 2x3 or 2x4 wood supports) do not use screws longer than 1 ¾”.

Chain Link Fence
U-Bolts are recommended for most chain link fences. The size of the U-bolt is dependent on the size(s) of fence posts. In most cases, corners, endpoints, and gate posts are larger than other posts in the fence line. The mounting plate can be secured to a post up to 2-½” in diameter.

Alternative option: Self-tapping screws. These can be used for all mounting plates, or in areas where U-bolts might not fit due to fence hardware. #8 screw ½”-¾” long works well for most fences.

Metal Fence (aluminum, wrought iron, etc.) with Square Posts
Square U-Bolts can be used. The most common size is 2”.

Alternative option: Self-tapping screws. These can be used for all mounting plates, or in areas where U-bolts might not fit due to fence hardware. #8 screw ½”-¾” long works well for most fences.

Brick/Concrete Block
Masonry screws are recommended. If possible, the fastener locations should be aligned with a mortar joint (this allows for easier repair if the system is ever removed). Pre-drill a pilot hole to prevent damage to brick/block, then secure masonry fasteners through the mounting plate. 3/16” x 1-¼” long masonry screw (such as a Tapcon - link includes the correct drill bit) recommended.

Vinyl/PVC
Dependent on the specific fence. If the fence has a post backing (the material inside the posts) then the fastener type is determined by the backing material. However, most vinyl fences have hollow posts which require the addition of backing material for our system to be installed on the post, leading to a more involved installation process.

Mounting plates can also be secured directly to vinyl fence panels with through-bolts and washers.